P44000 Temperature Transmitter | Input Pt100 resistance thermometer (RTD) | High isolation up to 6600V
Description
- Transmitter for Pt100 temperature sensors, 2- or 4-wire connection
- Fixed range models for 0 to 150 °C, 0 to 200 °C and 0 to 300 °C input ranges
- Impressed output current of 4 to 20 mA
- Compact 67.5 and 22.5 mm modular housings based on proven VariTrans technology
- High isolation up to 6 kV AC/DC basic insulation and up to 2.5 kV AC/DC reinforced insulation with overvoltage category III and pollution degree 2 according to EN 50178 (input against output and power supply)
- 22.5 mm housing for less demanding isolation requirements up to 2 kV AC/DC (basic insulation)
- Low measurement error of just ± 1 K (typically ± 0.5 K) and short T90 delay time of 100 ms
- VariPower broad-range power supply for 20 … 253 V AC/DC ensures safe operation even with unstable power grids
- Resistant to environmental influences through vacuum encapsulation
- Suitable for extreme environments: ambient temperature during operation –40 … +85 °C
- 5-year warranty
When temperatures are to be measured using Pt100 resistance thermometers in high-voltage environments, standard temperature transmitters are often unsuitable due to their insufficient insulation.
Resistance thermometers can be insulated against high voltage. In practice, however, the available installation space is often too small. Moreover, the insulation is weakened by thermal and mechanical aging.
For temperature measurement on power electronics components, maximum safety is therefore provided by high-voltage resistant galvanic isolation. A typical application is the monitoring of the winding temperature of electric motors, generators or transformers.
The Solution:
Pt100 Transmitter With 6 kV AC/DC Basic Insulation
The new ProLine P 44000 transmitter for high-voltage applications converts the resistance of a 2- or 4-wire Pt100 resistance thermometer into a 4 to 20 mA signal with high accuracy and short delay times.
The output signal is galvanically isolated from the input signal and the voltage supply. The isolation is designed for working voltages of up to 6 kV AC/DC. During routine testing, the test voltage is 15 kV AC. Vacuum encapsulation protects the circuit against environmental influences and ensures that the extraordinary isolation properties are maintained.
The product line covers the standard ranges of 0 to 150 °C, 0 to 200 °C and 0 to 300 °C. The transmitters are available in 67.5 and 22.5 mm modular housings to suit different requirements.
Condition Monitoring of High-Voltage Motors
Mar 2021
Interface Technology
We look forward to hearing from you!
Contact Us
| Product Category: | High Voltage Transducer, Sensor Transmitter |
|---|---|
| Device Type: | Temperature Transmitters |
| Input: | Resistance Thermometers |
| Output: | 4 … 20 mA |
| Working Voltage, Min.: | 50 V, 300 V, 1000 V, 2000 V, 3600 V, 4800 V, 6600 V |
| Test Voltage: | 2.5 kV, 5 kV, 10 kV, 15 kV, 510 V |
| Fault Class: | < 0.5 % |
| Housing: | 17.5 … 67.5 mm Modular housing |
| Cutoff Frequency: | < 1 kHz |
| Power Supply: | 24 V AC, 24 V DC, 110 / 115 V AC, 220 / 230 V AC, Broad-range power supply |
| Product Line: | ProLine |
Downloads
Brochures
Certificates
Our service
Used in Process or Applications
Related Products
Relevant Blog Posts
Apr 2023
Process Analytics
Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium
Jun 2022
Process Analytics
Combined pH- and ORP-Sensor SE555X/*-AMSN
Nov 2021
Process Analytics
SE655X Digital and SE656X Digital - Digital Conductivity Sensors with Ex Certification
May 2021
Process Analytics
New SE656N digital conductivity sensor
Feb 2018
Process Analytics