WG21 Repeater Power Supply | Input 4 … 20 mA | Integrated Power Supply | Ex | Transmission of HART signals
Description
For supply of intrinsically safe 2-wire transmitters and SMART transmitters
- SMART transmission
(Optional): Bidirectional point-to-point transmission of digital data according to the HART specification - High supply voltage and good hazardous area ratings:
Universal use - Broad-range power supply:
Just 2 versions for all mains voltages - Protective separation according to EN 61140
Protection of maintenance staff and subsequent devices against excessively high voltages - 3-port isolation:
Protection against incorrect measurements or damage to the equipment due to parasitic voltages - High transmission accuracy:
Exact transmission of measured values - Explosion protection according to ATEX
Easy use in hazardous areas - Modular housing 22.5 mm
Straightforward installation due to compact design - 5 year warranty
The WG 21 repeater power supply is used to supply intrinsically safe 2-wire transmitters. It supplies the transmitter with power and transmits the measurement signal to the output galvanically isolated and with high accuracy. In addition to the analog signal, the WG21 also optionally transmits data protocols for SMART transmitters (HART). It allows for bidirectional communication between the field device from every point of the wiring.
The high supply voltage, the good hazardous-area ratings and the broad-range power supply allow for universal use. Cables up to 1400 m in length can be used without any problems. Thanks to a new transformer-based transmission technique, the WG21 achieves an extraordinarily high transmission accuracy for hazardous-area applications. The encapsulation provides maximum operating safety, long-term stability, and disruptive strength even under extreme ambient conditions.
We look forward to hearing from you!
Contact Us
| Communication (Output, Digital): | HART |
|---|---|
| Product Category: | Isolated Signal Conditioner |
| Device Type: | Repeater Power Supplies |
| Input: | (±)20 mA, 4 … 20 mA |
| Output: | 0 … 20 mA, 4 … 20 mA |
| Working Voltage, Min.: | 50 V, 300 V, 1000 V |
| Test Voltage: | 2.5 kV, 5 kV, 510 V |
| Fault Class: | 0.1 %, < 0.5 % |
| Housing: | 17.5 … 67.5 mm Modular housing |
| Cutoff Frequency: | < 1 kHz |
| Power Supply: | 24 V AC, 24 V DC, 220 / 230 V AC |
| Product Line: | ProLine |
Downloads
Certificates
Our service
Used in Process or Applications
Related Products
Relevant Blog Posts
Apr 2023
Process Analytics
Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium
Jun 2022
Process Analytics
Combined pH- and ORP-Sensor SE555X/*-AMSN
Nov 2021
Process Analytics
SE655X Digital and SE656X Digital - Digital Conductivity Sensors with Ex Certification
May 2021
Process Analytics
New SE656N digital conductivity sensor
Feb 2018
Process Analytics